4.4.2 Automatic Transmission Commands
CC
Card Insertion Status Output
Function: Card insertion status output
Syntax:
stxCC:a,b;
(RS-232C, Command format: Type 2)
Syntax:
CC:a,b
(Telnet, Command format: Type 2)
a: Status of card slot A
0
Not
inserted
1
Inserted
b: Status of card slot B
0
Not
inserted
1
Inserted
Note:
This is transmitted automatically when a card is inserted or removed. This also occurs
automatically for verification after the Delete mode has been exited.
ST
Output at Finish of Playback
Function: Output at Finish of Playback
Syntax:
stxST:a;
(RS-232C, Command format: Type 2)
Syntax:
ST:a
(Telnet, Command format: Type 2)
a: The number showing the channel which playback finished.
0 When Dual Mono mode is OFF
1 L Channel when Dual Mono mode is ON
2 R Channel when Dual Mono mode is ON
Note:
Output when playback of phrases is finished and the AR is not playing any phrase.
PE
Output the Elapsed Time from the Start of the Phrase
Function: Output the elapsed time from the start of the phrase
Syntax:
stxPE:a;
(RS-232C, Command format: Type 2)
Syntax:
PE:a
(Telnet, Command format: Type 2)
a: (**H**M**S**F*S)
Note:
When operation is paused with the PE command, the AR-3000SD outputs the elapsed
time from the start of the phrase to the point where paused.
The number of digits for **F (frame) increases according to the value of MTC type
AE
Output the Total Number of Phrases Recorded on the Card
Function: Output the total number of phrases recorded on the card
Syntax:
stxAE:a;
(RS-232C, Command format: Type 2)
Syntax:
AE:a
(Telnet, Command format: Type 2)
a: the total number of phrases recorded on the card
Note:
This is output when AR receives an AE command.
“S” will be specified ahead of the total number.
AR-3000SD (Ver.1.00) Command Reference - 67
