PLC-ET30L Expand Serial Command Functional Specifications
30/62
8.8 Lamp Command
8.8.1 CF_LAMPH Command
Command
“CF_LAMPH_%1” [CR]
%1
“RST”
Details
Reset lamp running time (Available only in the normal Power ON status)
Response
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
8.8.2 CF_LAMPMODE Command
Command
“CF_LAMPMODE_%1” [CR]
%1
“AUTO1” ------------- Set lamp status to Auto1 mode
“AUTO2” ------------- Set lamp status to Auto2 mode
“HIGH” --------------- Set lamp status to High mode
“NORMAL” ---------- Set Lamp status to Normal mode
“ECO1” --------------- Set Lamp status to Eco1 mode
“ECO2” --------------- Set Lamp status to Eco2 mode
“UP” ------------------ Select lamp mode forward direction
“DN” ----------------- Select lamp mode backward direction
Details
Select Lamp mode (Available only in the normal Power ON status)
The value set by this command is stored in EEPROM and the setting remains
effective after the power is turned to ALL OFF status.
Response
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
8.9 Sound Command
8.9.1 CF_VOLUME Command
Command “CF_VOLUME_%1”[CR]
%1
“000-063” --------------------------- Directly select Volume setting value
“UP” --------------------------------- Current Volume setting value +1
“DN” --------------------------------- Current Volume setting value -1
Details
Control level of volume. (Available only in the normal Power ON status)
Set Volume Up/Down the same way as remote control and also directly select
Volume setting value. When setting Volume value, the Sound Mute ON status is
canceled just like RC operation. The value set by this command is stored in
Projector.
Response
Acceptable
“000”[CR]
Unacceptable
“Error Code”[CR]
8.9.2 CF_MUTE Command
Command “CF_MUTE_%1”[CR]
%1
“ON” ----------------------------- Set Sound Mute ON
“OFF” --------------------------- Set Sound Mute OFF
Details
Control Sound Mute ON/OFF (Available only in the normal Power ON status)
Response
Acceptable
“000”[CR]
Unacceptable
“Error Code”[CR]
