2-2-14. Main Code D8
When an error was detected in the file system on the internal memory, the following error occurs.
Main
code
Sub code
(1)
Sub code
(2)
Error message
Description
D8
01
ss
SLOT Mx FILE SYS-
TEM ERROR
An error was detected in the internal memory file sys-
tem. When the same error occurs each time the power
is turned on, the file system must be formatted.
• Probable cause: Internal memory
• Protected operation: None
2-2-15. Main Code E1
When an error related to usage restrictions was detected, one of the following errors occurs.
Main
code
Sub code
(1)
Sub code
(2)
Error message
Description
E1
01
pp
PORT x COND3 BAD,
STOP REC
Recording was suspended because the alternative sec-
tor of defective sector was fully used on the internal
memory.
• Probable cause: Internal memory
E1
06
pp
PORT x FS STUFFED,
STOP REC
Recording was suspended because the file system of the
internal memory reached the control limit.
• Probable cause: Internal memory
• Protected operation: Recording is no longer per-
formed.
E1
08
pp
PORT x WRITE FAIL,
STOP REC
Recording was suspended to protect data because over-
writing data to the internal memory was attempted.
• Probable cause: Internal memory
• Protected operation: Recording is no longer per-
formed. To make the internal memory recordable,
it must be formatted.
E1
09
ss
SLOT Mx CANNOT
REC
An error was detected in the unrecorded area of the in-
ternal memory.
• Probable cause: Internal memory
• Protected operation: Recording is no longer per-
formed. To make the internal memory recordable,
it must be formatted.
2-2-16. Main Code E4
When incorrect installation of the internal memory is detected, one of the following errors occurs.
Main
code
Sub code
(1)
Sub code
(2)
Error message
Description
E4
31
00
INTERNAL MEMORY
LACK
The internal memory is not accessible because a part of
or all internal memory cards has/have been removed.
• Probable cause: Internal memory
• Protection: Prohibition of memory access
E4
32
00
INTERNAL MEMORY
WRONG POSITION
The internal memory is not accessible because it is in-
stalled in a wrong slot.
• Probable cause 1: There is a blank slot between
internal memory cards.
• Probable cause 2: The internal memory was shif-
ted to another slot during use.
• Protection: Prohibition of memory access
PWS-4400
2-10