31 - 40
021774/07/14
6.3.14 Command TT
<id>TT <parameter><CR>
Automatic telegram output
Access:
Read / write
Description:
The command TT is used to select the automatic output of telegrams
(interval = 1 second).
Automatic telegram output remains switched off for the first 10
seconds after start-up of the Weather Station
. During this time the
user has the opportunity of changing the parameter TT.
Parameter description:
0
Automatic telegram output switched off.
1
Measured value telegram.
2
Sensor data telegram.
Response telegram:
See
section
6.1.1
Value range:
0...2
Initial value:
0
6.3.15 Command TZ
<id>TZ <parameter><CR>
Time zone
Access:
Read / write
Description:
The command TZ is used to change the output of date/time.
Parameter description::
0
UTC
23:
UTC-Zeit
– 1 hours
24:
UTC-Zeit
25:
UTC-Zeit + 1 hours
48:
CEST or CET
The change between summer- and winter time occurs
independently.
TZ
Signification
0
UTC
1
UTC
– 23 hours
...
...
24
UTC
...
-1
47
UTC + 23 hours
48
CEST or CET
Response telegram:
-
Value range:
0...48
Initial value:
0
