Switch Managed Access Point Commands 189
4 Wireless Commands
clear wireless ap neighbors
This command deletes entries from the managed AP client and AP neighbor lists. Note that
client neighbor entries added via a client association to the managed AP will not be cleared;
these are only removed by the system when a client disassociates.
Format
clear wireless ap neighbors
<
macaddr
>
Mode
Privileged EXEC
show wireless ap status
This command displays operational status for a switch managed AP. If no parameters are
specified, a summary of all managed APs is displayed. If an AP MAC address is specified, the
detailed status is displayed.
Format
show wireless ap
[<macaddr>]
status
Mode
Privileged EXEC
macaddr
Switch managed AP MAC address.
MAC Address
The Ethernet address of the switch managed AP.
IP Address
The network IP address of the managed AP.
Location
A location description for the AP, this is the value configured in the valid AP
database (either locally or on the RADIUS server).
Profile
The AP profile configuration currently applied to the managed AP, the profile
is assigned to the AP in the valid AP database.
Note:
Once an AP is discov-
ered and managed by the Unified Switch, if the profile is changed in the valid
AP database (either locally or on the RADIUS server) the AP must be reset to
configure with the new profile.
Vendor ID
Vendor of the AP software, this is learned from the AP during discovery.
Protocol Version
Indicates the protocol version supported by the software on the AP; this is
learned from the AP during discovery.
Software Version
Indicates the version of software on the AP; this is learned from the AP
during discovery.
Hardware Type
Hardware platform for the AP; this is learned from the AP during discovery.
Serial Number
Unique Serial number assigned to the AP; this is learned from the AP during
discovery.
Part Number
Hardware part number for the AP; this is learned from the AP during discov-
ery.
Configuration Status
This status indicates if the AP is configured successfully with the
assigned profile.
Last Failing Configuration Element
The element ID of the last failing configuration ele-
ment. If the configuration status indicates a partial or complete failure, this
field indicates the last element that failed during configuration.
Summary of Contents for DWL-8500AP
