Chapter 4 Command Reference
Introduction
Programming Guide
4-117
This command simulates the pressing or a front-panel key.
The <numeric_value> is a key code value.
This command puts an entry in the Key Queue (just as any front-panel key press
does). The length of the Key Queue is 500.
The keys and their corresponding key codes are listed in the following table.
Key
Key Code
Key
Key Code
Freq & Ratio
1
d
25
Time & Period
4
f
28
Other Meas
2
s
26
Gate & ExtArm
5
g
27
Uppr & Lower
7
Channel 1 Trigger/Sensitivity
13
Limit Modes
8
Channel 1 50
Ω
/1M
Ω
14
Scale & Offset
10
Channel 1 DC/AC
15
Stats
11
Channel 1 X10 Attenuate
16
Recall(Utility)
3
Channel 1 100kHz Filter
17
Save & Print
6
Channel 2 Trigger/Sensitivity
19
Run
9
Channel 2 50
Ω
/1M
Ω
20
Stop/Single
12
Channel 2 DC/AC
21
+/-
29
Channel 2 X10 Attenuate
22
Enter
30
Channel 2 100kHz Filter
23
1 to 30, except 18 and 24
•
Numeric data transferred as ASCII bytes in <NR1> format.
•
The query returns the key code for the last key pressed. A value of
-1 indicates the queue (last in, first out) is empty.
<numeric_value>
Range
Query Response
Summary of Contents for 53131A
