1269 User Manual
Error Messages B-2
Table B-1, Error Messages
Error Message
ESR Bit Set
Error Description
0,”No Error”
none
The error queue is empty.
-100,”Command error”
CME
The command is not recognized.
-101,”Invalid character”
CME
There is an invalid character embedded in the command.
-102,”Syntax error”
CME
An unrecognized command or data type was encountered.
-103,”Invalid separator”
CME
The parser was expecting a separator and encountered an
illegal character.
-104,”Data type error”
CME
The parser encountered a parameter data type different than
expected. (For example, expected numeric/received string).
-105,”GET not allowed”
CME
A Group Execute Trigger was received within a command.
-108,”Parameter not allowed”
CME
More parameters were received than were expected.
-109,”Missing parameter”
CME
Fewer parameters were received than expected.
-110,”Command header error”
CME
An error was detected in the header.
-111,”Header separator error”
CME
An illegal separator character followed the command header.
-112,”Program menmonic too long”
CME
The command keyword contains more than 12 characters.
-113,”Undefined header”
CME
Command header is syntactically correct but not recognized.
-114,”Header suffix out of range”
CME
The value of a numeric suffix makes the header invalid
(VOLT8).
-120,”Numeric data error”
CME
The data appears to be numeric but is syntactically incorrect.
-121,”Invalid character in number”
CME
An invalid character for the data byte was encountered.
-123,”Exponent too large”
CME
The magnitude of the exponent was larger than 32000.
-124,”Too many digits”
CME
The mantissa of a decimal numer contains more than 255
digits.
-128,”Numeric data not allowed”
CME
A legal numeric data element was received but is not allowed.
-130,”Suffix error”
CME
The command suffix is not understood or recognized.
-131,”Invalid suffix”
CME
The suffix does not follow the syntax in IEEE-488.2, Sec
7.7.3.2.
-134,”Suffix too long”
CME
The suffix contains more than 12 characters.
-138,”Suffix not allowed”
CME
A suffix was encountered after a numeric parameter value
where no suffix is allowed. (e.g.” *SRE 255 MHZ”).
-140,”Character data error”
CME
A character received as a command parameter is invalid.
-141,”Invalid character data”
CME
The character data element has an invalid character or the
character data is not valid for the command header.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
