RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DM3000 Series
2-49
:system:format:decimal
□
<value>
Function:
The command queries and sets radix point format used in system.
Parameters:
Name
Type
Range
Default
<value>
Discrete
{COMMA | DOT}
DOT
Explanations:
:system:format:decimal? queries the radix point format.
:system:format:decimal
□
<value>
sets the radix point format. “COMMA” means to
use “,” as a radix point, and at the same time the former “,” is changed into “.”. “DOT”
means to use “
·
” as a radix point, meanwhile the former “.” is changed into “,”.
Remarks:
As it is easier to change the format of data separator by using this
commond, so please do it carefully.
Return Format:
:system:format:decimal? returns the current radix point format.: COMMA or DOT.
10.
:system:format:separate
Syntax:
:system:format:separate?
:system:format:separate
□
<value>
Function:
The command queries and sets the format of system separator.
Parameters:
Name
Type
Range
Default
<value>
discrete
{ON | NONE | SPACE}
ON
Explanations:
:system:format:separate? queries the system data separator format.
:system:format:separate
□
<value>
sets the system data separator format.
“ON” denotes displaying the seperator, “NONE” denotes not displaying the spererator,
and “SPACE” denotes that a space replaces the separator.