RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DM3000 Series
2-81
The command queries and sets the sample rate of datalog function.
Explanations:
:datalog:configure:rate? queries the sample rate of datalog function.
:datalog:configure:rate
□
<range>
sets the sample rate of datalog function, the range
is 1~13, respectively showing the sample rate is 1/10min, 1/5min, 1/min, 1/10s, 1/s,
10/s, 50/s, 100/s, 833/s, 1K/s, 5K/s, 10K/s, 50K/s
.
Return Format:
:datalog:configure:rate
？
returns the range of the current sample rate : 1~13.
11.
:datalog:run
Syntax:
:datalog:run
Function:
The command runs the datalog function according to the startmode
。
Explanation:
Before sending the command, you should send “:datalog:configure” to set the datalog
function and range. Or else the system will not run, and return the wrong sign.
12.
:datalog:stop
Syntax:
:datalog:stop
Function:
The command stops the datalog function.
13.
:datalog:fetchdata
Syntax:
:datalog:fetchdata
□
<value>
Function:
The command fetches the data the datalog system acquire.(32 digits binary format
data)
