Diagnostics
85
high byte = 03h
(
frame delivery problem while updating slave data)
high byte = 04h (frame delivery problem while reading slave diagnostics)
high byte = 05h (error in diagnostic status byte #1 during configure)
The value in the low byte depends on the value returned by the slave in the
first station status byte when the master reads diagnostics during configura-
tion. Mask the value with 0F5h and any bits that are set in the result should
not be set. Mask the value in the low byte with 02h and bit 1 should be set.
7
Invalid response after sending configuration
check data to the slave
8
Response to configuration check packet was
non-zero length (slave should never return
anything)
9
Invalid response after sending the second
diagnostic status request to the slave
Value
Description
1
error in data update during configuration
2
No response or NAK when updating data while
online
Value
Description
1
Invalid response when reading slave diagnostics
while online
2
No response or NAK when reading slave
diagnostics while online
Value
Description
Summary of Contents for SST-PFB-SLC
