REMOTE CONTROL
65
Output Commands
:OUTPut:DELay:ON ............................................................. 65
:OUTPut:DELay:OFF ........................................................... 65
:OUTPut:MODE .................................................................... 66
:OUTPut[:STATe][:IMMediate] ........................................... 66
:OUTPut[:STATe]:TRIGgered ............................................. 66
:OUTPut:PROTection:CLEar .............................................. 67
:OUTPut:PROTection:TRIPped ......................................... 67
:OUTPut:DELay:ON
Set
Query
Description
Sets the Delay Time in seconds for turning the
output on. The delay is set to 0.00 by default.
Syntax
Query Syntax
:OUTPut:DELay:ON {<NR2>|MINimum|MAXimum}
:OUTPut:DELay:ON?
Parameter
<NR2>
0.00~99.99 seconds, where 0=no delay.
Return parameter “0.00”
Returns the delay on time in seconds
until the output is turned on.
:OUTPut:DELay:OFF
Set
Query
Description
Sets the Delay Time in seconds for turning the
output off. The delay is set to 0.00 by default.
Syntax
Return Syntax
:OUTPut:DELay:OFF {<NR2> |MINimum|MAXimum}
:OUTPut:DELay:OFF?
Parameter
<NR2>
0.00~99.99 seconds, where 0=no delay.
Return parameter “0.00”
Returns the delay off time in seconds
until the output is turned off.
