C-11
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Appendix C Command Reference
Commands
rollback
To remove any patches and roll back to the originally installed version, use the
rollback
command:
rollback
[
appName
]
Syntax Description
appName
Name of the program (provided as part of patch distribution) to remove a specific
patch and roll back to original installed version.
Usage Guidelines
Use this command to return ACS to its original condition after installing a patch program. The
rollback
command has the effect of stopping all ACS services, copying all files in the backup directory to the
originally installed directories, restoring a specified list of Registry entries, and starting all ACS services
once again.
Example
The following command executes the program
remvptch4
and returns the system to the state that existed
before the patch program was applied:
rollback
remvptch4
set admin
To set the name of the ACS SE administrator, use the
set admin
command:
set admin
[
administratorname
]
Syntax Description
administratorname
Name of system administrator.
Usage Guidelines
Use the
set admin
command to reset the name of the ACS SE administrator. For more information, see
Resetting the Solution Engine Administrator Password, page 4-15
.
Example
This command sets the administrator name to john:
set
admin john
set dbpassword
To set the ACS SE database password, use the
set dbpassword
command. Subsequent prompts take you
through the process.
set dbpassword
