![background image](http://html.mh-extra.com/html/cisco/mds-9000-series/mds-9000-series_command-reference-manual_21253814.webp)
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
16-10
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 16 N Commands
npv traffic-map server-interface
npv traffic-map server-interface
To configure the server interface based trafic engineering, use the
npv traffic-map server-interface
command in configuration mode. To revert to the default value, use the
no
form of the command.
npv traffic-map server-interface <
if -range
> external-interface <
if-range
>
no npv traffic-map server-interface <
if -range
> external-interface <
if-range
>
Syntax Description
Defaults
None.
Command Modes
Configuration mode.
Command History
Usage Guidelines
None.
Examples
The following example shows how to configure NPV traffic map server interface:
switch(config)#
npv traffic-map server-interface fc1/1 external-interface fc1/2
switch(config)#
npv traffic-map server-interface fc1/4-5 external-interface fc1/6-7
switch(config)#
no npv traffic-map server-interface fc1/4-5 external-interface fc1/6-7
switch(config)#
no npv traffic-map server-interface fc1/1 external-interface fc1/2
switch(config)#
Related Commands
if-range
Range may vary from <1-1>.
Release
Modification
3.3(1a)
This command was introduced.
Command
Description
show npv-traffic-map
Displays information about the NPV traffic map.