S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
18-19
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 18 P Commands
port-monitor name
port-monitor name
To display the counter details of the policy, use the
port-monitor name
command. To delete port
monitor policy, use the
no
form of the command.
port-monitor name [
string
]
no port-monitor name [
string
]
Syntax Description
Defaults
None.
Command Modes
Configuration mode.
Command History
Usage Guidelines
None.
Examples
The following example shows how to create a cisco policy name and to assign the default value:
switch#
config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
port-monitor name cisco
switch(config-port-monitor)#
switch(config-port-monitor)#
do show port-monitor cisco
Policy Name : cisco Status : Not Active
Port type : All Ports
Counter Threshold Interval Rising Threshold Falling Threshold Stat
------- --------- -------- ---------------- ------------------ ----
Link Loss Delta 60 5 1 Active
Sync Loss Delta 60 5 1 Active
Protocol Error Delta 60 1 0 Active
Signal Loss Delta 60 5 1 Active
Invalid Words Delta 60 1 0 Active
Invalid CRC's Delta 60 5 1 Active
RX Performance Delta 60 2147483648 524288000 Active
TX Performance Delta 60 2147483648 524288000 Active
State Change Delta 60 1 0 Active
-----------------------------------------------------------------------------
switch(config-port-monitor)#
Related Commands
string
Displays the policy name.
Release
Modification
4.1(1b)
This command was introduced.
Command
Description
show port-monitor
Displays all port monitor policies.