Camera Operation
•
29
4.
Set the default selector to
UserSet1.
5.
Save User Set 1.
6.
Power cycle the camera.
7.
Reconnect to the camera through CamExpert.
8.
The FFC mode will be
Off
when it should be
ActiveAll.
Acquisition and Transfer Control Category
This category contains invisible registers that support feature streaming. Feature streaming
is the process where feature values are read from or written to the camera in a batch.
Validation of the data is postponed until the streaming is ended. See figure below.
Figure 11 Streaming Feature Data to the Camera
Feature Validation is turned off in this mode so that the order in which the feature values
are set is irrelevant. For example, if validation was on during this process
Acquis
i
tionFrameRate
would have to be set before ExposureTime because the maximum ExposureTime can be
limited by the camera’s frame rate.
CamExpert uses feature streaming when saving or loading the camera’s ccf file. This file can
be used to clone cameras so that they have the same settings. Most GUIs and SDKs will
hide this functionality.
Name
DeviceRegistersStreamingStart
Display Name
Device Registers Streaming Start
Name Space
SFNC
Firmware Release
05
Visibility
Invisible
Access
Read-Write
Type
Command
Notes
Announces the start of registers streaming without immediate checking for consistency.
