MMB CLI (Command Line Interface) Operations
2.2 Setting Commands
380
CA92344-0539-04
2.2.25 set partition home
It sets the Home SB of the specified partition.
It specifies the number of SB to be set in Home. If the specified SB does not exist, the process is not
executed. When specified SB is Memory Scale-up Board, processing is not executed. When the specified
partition is an Extended Partition, the error message is displayed, and the operation to the specified partition
cannot be operated.
Resource (USB1, VGA/USB2) of Home SB allocated in Extended Partition automatically changes into the
resource of specified SB when the Extended Partitioning mode of the specified partition is Enable setting.
Privilege: Administrator
(1) Input format
set partition home <partition#> SB <SB#>
(2) Option
None
(3) Usage example
Example: When setting SB#2 as Home in Partition3
# set partition home 3 SB 2
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
The specified partition number is invalid.
The specified SB number is invalid.
The specified SB#x is Not
‐
present.
Unable to change the home SB while the partition is running. Please try to change the home SB after the
partition is shutdown.
Unable to execute this command on a standby MMB.
The specified parameter is invalid.
Unable to execute this command because the system is under maintenance.
Unable to execute this command because the Partition#x is under maintenance.
Succeed to set partition home command.
Failed to execute set partition home command.
Failed to execute %s command.
The specified command is not supported.(error=[%s])