MeshLinx MWI-5000 User Guide
MESHLINX CONFIDENTIAL
1
clean: Delete the MAC address from the lists
set ap sessiontimeout [[HH]h[MM]m[SS]s]
– Set login session timeout.
get ap sessiontimeout
– Get login session timeout
4.2.3.13
TCPIP
get tcpip
– Get current settings for the TCP/IP stack.
Example:
TCPIP Subsystem Configuration and Status
========================================
Subsystem Status .................... : Started
IP Address .......................... : 10.1.4.85
MAC Address ......................... : 00:1A:52:00:04:C0
Subnet Mask ......................... : 255.255.255.0
DHCP Client ......................... : On
Gateway Address ..................... : 10.1.4.1
Primary DNS Address ................. : 10.1.1.1
Secondary DNS Address ............... : 10.1.1.2
get tcpip ipaddr
- Get IP address for the AP.
Ex. 10.1.4.85.
get tcpip mac –
Get MAC address for wifX
get tcpip netmask
- Get the subnet mask for the AP.
Ex.
255.255.255.0.
get tcpip gateway
- Get gateway router address used by AP.
Ex. 10.1.4.1.
get tcpip dns
- Get address(es) of DNS servers to be used by
AP.
get tcpip dhcp
- Get DHCP client setting for AP.
set tcpip ipaddr <ip_address>
- Statically assign IP address
for the AP.
set tcpip netmask <net_mask>
- Set the subnet mask for the
AP.
set tcpip gateway <gateway_address>
- Set the gateway router
address to be used for forwarding packets not on the subnet.
set tcpip dns <pri_dns_address> [<sec_dns_address>]
– Set DNS
server address(es) to be used by the AP.
set tcpip dhcp [enable | disable]
– Set DHCP to
enable/disable. If set to
enable
the AP will use a DHCP
