MeshLinx MWI-5000 User Guide
MESHLINX CONFIDENTIAL
2
get dhcp leasetime
– Get current DHCP lease time in seconds.
get dhcp dns
– Get addresses of current DNS servers to be
used by DHCP.
get dhcp domain
– Get the domain currently associated with
DHCP.
get dhcp netmask
– Get the subnet mask associated with the
DHCP address space.
get dhcp broadcast
– Get the broadcast address for DHCP.
get dhcp router
– Get the address of the default gateway
(router) to be used by DHCP clients.
get dhcp range
– Get the IP range to be used for DHCP-
assigned addresses.
set dhcp
- Display DHCP parameters that can be set.
set dhcp leasetime <int>
- Set the DHCP lease time in
seconds.
set dhcp dns <dns ip addr1>
[dns ip addr2]
– Set DNS server
IP addresses to be used by DHCP (maximum two, minimum one).
When specifying two addresses, the addresses must be
separated by a space.
set dhcp domain <domain name or ip>
– Set domain for DHCP.
The domain name can be a conventional domain name such as
“meshlinx.com” or an IP address such as “12.23.34.100”.
set dhcp netmask <IP addr>
– Set the subnet mask for DHCP.
set dhcp broadcast <IP address>
– set the broadcast address
for DHCP.
set dhcp router <string, "12.23.34.45 12.23.34.200">
– Set
the gateway router to be used by DHCP clients.
set dhcp range
<IP addr start> <IP addr end> -
Set the IP
address range for assignment to DHCP clients.
set dhcp range comment <string>
– Set comments for DHCP IP
address range.
4.2.3.16
Time-Based Auto-Recognition (TBAR)
By default,
Autoconfig
/
LnL
is disabled on the system. In this
default condition the basic AP functionality will be exactly the