Manual revision 041
Section 4: Deploying and Operating MicroCAT
SBE 37-SM RS-232
34
Status
Commands (
continued
)
GetHD
Get and display hardware data, which is
fixed data describing MicroCAT:
Device type, Serial number
Manufacturer
Firmware version
Firmware date
PCB assembly number
Manufacture date
Sensor types and serial numbers
Help
Display list of currently available
commands, which may be useful if you do
not have access to the MicroCAT manual
and/or are not using SeatermV2.
Command list depends on logging state.
Many commands are not available while
MicroCAT is sampling autonomously or
waiting to start autonomous sampling
(
StartLater
has been sent).
Example:
(user input in bold, command used to modify parameter in parentheses)
gethd
<HardwareData DeviceType = 'SBE37SM-RS232' SerialNumber = '03730051'>
<Manufacturer>Sea-Bird Scientific</Manufacturer>
<FirmwareVersion>5.0.0</FirmwareVersion>
<FirmwareDate>4 August 2017</FirmwareDate>
<CommandSetVersion>1.5</CommandSetVersion>
<PCBAssembly SerialNum='122106' AssemblyNum='41783k'/>
<PCBAssembly SerialNum='122105' AssemblyNum='41826A'/>
<PCBAssembly SerialNum='122104' AssemblyNum='41661C'/>
<MfgDate>04 Aug 2017</MfgDate>
<FirmwareLoader>SBE 37-232-V3 FirmwareLoader V 1.0</FirmwareLoader>
<InternalSensors>
<Sensor id = 'Temperature'>
<type>temperature-1</type>
<SerialNumber>03730051</SerialNumber>
</Sensor>
<Sensor id = 'Conductivity'>
<type>conductivity-1</type>
<SerialNumber>03730051</SerialNumber>
</Sensor>
<Sensor id = 'Pressure'>
<type>strain-0</type>
<SerialNumber>2478619</SerialNumber>
</Sensor>
</InternalSensors>
</HardwareData>