DRAFT
© 2003 - 2005 Sipura Technology, Inc
Proprietary (See Copyright Notice on Page 2)
42
Debug Server
The debug server name and port. This feature
specifies the server for logging SPA debug information.
The level of detailed output depends on the debug level
parameter setting.
FQDN
Debug Level
The higher the debug level, the more debug
information will be generated. Zero (0) means no
debug information will be generated.
Choice 0
Primary NTP
Server
IP address or name of primary NTP server.
Str127
or IP
Secondary NTP
Server
IP address or name of secondary NTP server
Str127
or IP
Notes:
1. Parallel DNS query mode: SPA will send the same request to all the DNS servers at the same
time when doing a DNS look up, the first incoming reply will be accepted by SPA.
2. To log SIP messages, Debug Level must be set to at least 2.
3. If both Debug Server and Syslog Server are specified, _Syslog messages are also logged to the
Debug Server.
Provisioning Parameters
Provisioning operations are gated by the Provision_Enable parameter.
Parameter Name
Description
Type
Default
Provision Enable
Master enable for configuration profile resync
operations
Bool yes
Resync On Reset
Resyncs configuration profile from configuration
server whenever the SPA resets.
Bool yes
Resync Random Delay
Spread interval for resync requests
Time0
2
Resync Periodic
Resyncs configuration profile periodically after
reset.
Time0 3600
Resync Error Retry Delay
Retry interval following resync failure
Time0
3600
Forced Resync Delay
Maximum time SPA will wait before initiating a
resync operation if it is not idle.
Time0 14400
Resync From SIP
Enables resync of configuration profile from a
SIP command
Bool Yes
Resync After Upgrade Attempt Whether or not to resync following an upgrade
attempt
Bool Yes
Resync Trigger 1
Scriptable resync condition
Script
empty
Resync Trigger 2
Scriptable resync condition
Script
empty
Resync Fails On FNF
Whether
file-not-found
response
from
provisioning server should be considered a
failed resync
Bool Yes
Profile Rule
Primary configuration profile URL script.
ProfileScript
/spa841.cfg
Profile Rule B
Secondary configuration profile URL script
ProfileScript
empty
Profile Rule C
Secondary configuration profile URL script
ProfileScript
empty
Profile Rule D
Secondary configuration profile URL script
ProfileScript
empty
Log Resync Request Msg
Syslog message generated when attempting a
resync
ProfileMsg See
provisioning
discussion
section
Log Resync Success Msg
Syslog message generated after a successful ProfileMsg
See