DRAFT
© 2003 - 2005 Sipura Technology, Inc
Proprietary (See Copyright Notice on Page 2)
50
Vertical Service Activation Codes
Parameter Name
Description
Type
Default
Call Return Code
Call the last caller.
ActCode
*69
Blind Transfer Code
Blind transfer current call to the target specified
after the activation code
ActCode *98
Cfwd All Act Code
Forward all calls to the target specified after the
activation code
ActCode *72
Cfwd All Deact Code
Cancel call forward all
ActCode
*73
Cfwd Busy Act Code
Forward busy calls to the target specified after
the activation code
ActCode *90
Cfwd Busy Deact Code
Cancel call forward busy
ActCode
*91
Cfwd No Ans Act Code
Forward no-answer calls to the target specified
after the activation code
ActCode *92
Cfwd No Ans Deact Code
Cancel call forward no-answer
ActCode
*93
Call Back Act Code
Callback when the last outbound call is not busy
ActCode
*66
Call Back Deact Code
Cancel callback
ActCode
*86
Block CID Act Code
Block CID on all outbound calls
ActCode
*67
Block CID Deact Code
Unblock CID on all outbound calls
ActCode
*66
Block CID Per Call Act Code
Block CID on the next outbound call
ActCode
*81
Block CID Per Call Deact Code
Unblock CID on the next inbound call
ActCode
*82
Block ANC Act Code
Block all anonymous calls
ActCode
*77
Block ANC Deact Code
Unblock all anonymous calls
ActCode
*87
DND Act Code
Enable Do Not Disturb
ActCode
*78
DND Deact Code
Disable Do Not Disturb
ActCode
*79
Secure All Call Act Code
Make all outbound calls secure
ActCode
*16
Secure No Call Act Code
Make all outbound calls not secure
ActCode
*17
Secure One Call Act Code
Make the next outbound call secure. This
operation is redundant if all outbound calls are
secure by default.
ActCode *18
Secure One Call Deact Code
Make the next outbound call not secure. This
operation is redundant if all outbound calls are
not secure by default.
ActCode *19
Referral Services Codes
One or more *code can be configured into this
parameter, such as *98, or *97|*98|*123, etc.
Max total length is 79 chars. This parameter
applies when the user places the current call on
hold (by Hook Flash) and is listening to 2nd dial
tone. Each *code (and the following valid target
number according to current dial plan) entered
on the 2nd dial-tone triggers the SPA to perform
a blind transfer to a target number that is
prepended by the service *code. For example,
after the user dials *98, the SPA plays a special
dial tone called the "Prompt Tone" while waiting
for the user the enter a target number (which is
checked according to dial plan as in normal
dialing). When a complete number
is entered, the SPA sends a blind REFER to
the holding party
with
the
Refer-To target equals to
*98<target_number>.
This feature allows the SPA to "hand off" a
call to an application server to perform further
processing, such as call park.
Notes:
Str79
