56
Parameter
Description
Port:
The logical port for the settings contained in the same row.
Policy ID:
Selects the policy to apply to this port. The allowed values are 0 through
255. The default value is 0.
Action:
Selects whether forwarding is permitted ("Permit") or denied ("Deny"). The
default value is "Permit".
Rate Limiter ID:
Selects which rate limiter to apply on this port. The allowed values
are “Disabled” or the values 1 through 16. The default value is "Disabled".
Port Redirect:
Selects which port frames are redirected on. The allowed values are
“Disabled”
or a specific port number. The default value is "Disabled".
Mirror:
Specifies the mirror operation of this port. The allowed values are:
Enabled:
Frames received on the port are mirrored.
Disabled:
Frames received on the port are not mirrored.
The default value is "Disabled".
Logging:
Specifies the logging operation of this port. The allowed values are:
Enabled:
Frames received on the port are stored in the System Log.
Disabled:
Frames received on the port are not logged.
The default value is "Disabled". Please note that the system log memory
size and logging rate is limited.
Shutdown:
Specifies the port shut down operation of this port. The allowed values
are:
Enabled:
If a frame is received on the port, the port will be disabled.
Disabled:
Port shut down is disabled.
The default value is "Disabled".
State:
Specifies the port state of this port. The allowed values are:
Enabled:
To reopen ports by changing the volatile port configuration of the
ACL user module.
Disabled:
To close ports by changing the volatile port configuration of the
ACL user module.
The default value is "Enabled".
Counter:
Counts the number of frames that match this ACE.
Buttons:
Apply
– Click “Apply” to apply changes.
Reset
- Click “Reset” to undo any changes made locally and revert back to
previously saved values.
Upper right icon (Refresh, clear):
You can click them to refresh the ACL Port
Configuration or clear them manually.
