N I C M I B D e f i n i t i o n
A p p e n d i x C : N I C M I B D e f i n i t i o n
❖
C-5
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total Number of ports."
::= { dpidiag 10 }
NIC value is '1'
numserialports OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total Number of serial ports."
::= { dpidiag 11 }
NIC value is '0'
numparaports OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total Number of parallel ports."
::= { dpidiag 12 }
NIC value is '1'
dpicommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..28))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies the community name to be used for SETs. It defaults to 'private'.
When read with the'public'community name, the value is scrambled"
::= { dpidiag 13 }
iptrapaddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies the internet address of the management station which should
receive TRAPs."
::= { dpidiag 14 }
NIC default is read back as 0.0.0.0
ipxtrapaddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..22))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies the IPX address of the management station which should receive
TRAPs. The format is:nnnnnnnnn:mmmmmmmmmmmm, where:
n = net address hex digit ,
m = MAC address hex digit."
::= { dpidiag 15 }
NIC default is all zeros
statusprint OBJECT-TYPE
Book.frm : APPC.FRM Page 5 Saturday, October 12, 1996 7:43 AM
