N I C M I B D e f i n i t i o n
A p p e n d i x C : N I C M I B D e f i n i t i o n
❖
C-9
"This variable specifies the baud rate for the port specified by portindex. The port must
be a serial port for this variable to apply."
::= { portcapEntry 11 }
NIC response is N/A
portparity OBJECT-TYPE
SYNTAX DisplayString (SIZE(3..3))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies the parity used by the port specified by portindex. The port must
be a serial port for this variable to apply."
::= { portcapEntry 12 }
NIC response is N/A
portstopbits OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..3))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies the number of stop bits used by the port specified by portindex.
The port must be a serial port for this variable to apply."
::= { portcapEntry 13 }
NIC response is N/A
portdatabits OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..1))
ACCESS read-write
STATUS mandatory
DESCRIPTION
“This variable specifies the number of data bits used by the port specified by portindex.
The port must be a serial port for this variable to apply."
::= { portcapEntry 14 }
NIC response is N/A
portreadybusy OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used to ENABLED/DISABLE the hardware flow control capability of the port
specified by portindex. The port must be a serial port for this variable to apply."
::= { portcapEntry 15 }
NIC response is N/A
portxonxoff OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used to ENABLED/DISABLE the software XON/XOFF flow control mechanism for
the port specified by port index. The port must be a serial port for this variable to
apply."
::= { portcapEntry 16 }
NIC response is N/A
messageTable OBJECT-TYPE
SYNTAX SEQUENCE OF MessageEntry
Book.frm : APPC.FRM Page 9 Saturday, October 12, 1996 7:43 AM
