9: Device Ports
EMG™ Edge Management Gateway User Guide
168
Figure 9-9 Sensorsoft Status
Device Port Commands
Go to
to view CLI commands which correspond to the web page entries
described above.
Device Commands
Go to
to view CLI commands which correspond to the web page entries
described above.
Interacting with a Device Port
Once a device port has been configured and connected to an external device such as the console
port of an external server, the data received over the device port can be monitored at the
command line interface with the connect listen command, as follows:
To connect to a device port to monitor it:
connect listen deviceport <Port # or Name>
In addition, you can send data out the device port (for example, commands issued to an external
server) with the connect direct command, as follows:
To connect to a device port to monitor and/or interact with it, or to establish an outbound
network connection:
connect direct <endpoint>
endpoint is one of:
deviceport <Port # or Name>
ssh <IP Address> [port <TCP Port>][<SSH flags>]
where:
<SSH flags> is one or more of:
