IntelliTouch i-Link Protocol Interface Adapter User’s Guide
Control Heat Source/Heat Method
POOLHT:
Enable/Disable Pool Heater
POOLHT2
:
Enable/Disable High Pool Heater
SPAHT:
Enable/Disable Spa Heater
SOLHT:
Enable/Disable Pool Solar
SPASOLHT:
Enable/Disable Spa Solar
SOLPREF:
Enable/Disable Pool Solar Preferred
SPASOLPREF:
Enable/Disable Spa Solar Preferred
Note:
POOLHT is used in this example.
Request State:
Query:
#POOLHT ?<cr>
Response:
!00 POOLHT = x<cr>
(RSPFMT = 0)
!00 x<cr>
(RSPFMT = 1)
Where x is 1 or 0, and 1 indicates ON, 0 indicates OFF
Set State:
Command:
#POOLHT = x<cr>
Where x is 1 or 0, and 1 indicates ON, 0 indicates OFF
Response:
!00 POOLHT = x<cr>
(RSPFMT = 0)
!00 x<cr>
(RSPFMT = 1)
Where x is 1 or 0, and 1 indicates ON, 0 indicates OFF
Toggle State:
Toggle:
#POOLHT <cr>
Response:
!00 POOLHT = x<cr>
(RSPFMT = 0)
!00 x<cr>
(RSPFMT = 1)
Where x is 1 or 0, and 1 indicates ON, 0 indicates OFF
Note:
Turning POOLHT ON will enable the heater, and disable solar
option.
Turning POOLHT OFF will disable all heat sources for pool.
Turning SOLHT ON will select the SOLAR ONLY option of the
IntelliTouch.
Turning SOLPREF ON will select the SOLAR PREFERRED option of
the IntelliTouch. The same rules apply for the Spa options
12