IntelliTouch i-Link Protocol Interface Adapter User’s Guide
Special COMMAND only commands for lights
ALLLIGHTS:
All Lights Control
Control All Lights.
Set State:
Command:
#ALLLIGHTS = x<cr>
Where x is 1 or 0, and 1 indicates ON, 0 indicates OFF
Response:
!00 ALLLIGHTS = x<cr>
(RSPFMT = 0)
!00 x<cr>
(RSPFMT = 1)
Where x is 1 or 0, and 1 indicates ON, 0 indicates OFF
Note:
ALLIGHTS only operate the lights configured in the special ‘Lights’ screen of
IntelliTouch Indoor Control Panel.
COLORSWIM:
Colored Lights Control
COLORSET:
COLORSYNC:
Send Command:
Command:
#COLORSET <cr>
Response:
!00 COLORSET = 1<cr>
(RSPFMT = 0)
!00 1<cr>
(RSPFMT = 1)
Note:
The Color Commands only operate the lights configured in the special
‘Lights’ screen of
IntelliTouch Indoor Control Panel.
COLORSWIM:
Start a Color Swim Sequence
COLORSET:
Set Lights to pre-selected Colors
COLORSYNC:
Synchronize all Color Lights
Special QUERY only commands
POOLTMP:
Current Temperature
SPATMP
:
Query Current Temperature.
AIRTMP:
Request State:
Query:
#POOLTMP ?<cr>
Response:
!00 POOLTMP = xx<cr>
(RSPFMT = 0)
!00 xx<cr>
(RSPFMT = 1)
Where xx is the current temperature value (in ASCII) of the Item.
Note:
POOLTMP requires that the POOL (PUMP) is on and not in SPA Mode. To
return a valid temperature SPATMP requires that the SPA is ON.
15
