Remote Control Commands
R&S
®
NGL200
102
User Manual 1178.8736.02 ─ 02.01
OUTPut:IMPedance:STATe
<state>
OUTPut:IMPedance:STATe?
Activates/Deactivates or Queries the impedance target for the selected channel.
Parameters:
<state>
OFF | ON | 0 | 1
OFF | 0
Deactivates output impedance for the selected channel.
ON | 1
Activates output impedance for the selected channel.
Example:
OUTPut:IMPedance 1
OUTPut:IMPedance:STAT? -> 1
Return output impedance state as on.
OUTPut:SELect
<state>
OUTPut:SELect?
Activates/Deactivates or Queries the selected channel.
Parameters:
<state>
OFF | ON | 0 | 1
OFF | 0
Deactivates the selected channel.
ON | 1
Activates the selected channel.
*RST:
OFF | 0
Example:
See
Example "Activating the channels"
7.5.7
Fuse Setting
The
FUSE
subsystem contains the commands for activating fuses and setting fuse
parameters of the output channels.
The delay function of the fuses takes effect when the corresponding channel is activa-
ted (Output On).
Example: Configuring fuses
This example contains all commands to configure and query the fuse states and set-
tings.
// ************************************************
// Activate a fuse
// ************************************************
INST OUT1
FUSE 1
Configuration Commands
