DOC06501_Revision
F
ATS-6501 Users Guide
89
Syntax
: log_interval [n]
Note:
Changing the interval will not impact the log files already stored on the system.
Command Example:
ATS-6501> log_interval 5
Query:
ATS-6501>settings gps_logging:ftp:interval
5
Log Number
Description:
The maximum number of logs to save on the system. Once the number of
logs has reached the maximum value the system will delete the oldest log and replace it
with the newest log each time a new log file is generated. It will continue to do this as long
as the number of log files storage is equal to the log number. Default value is 100 logs
minutes.
Syntax
: log_number [n]
Note:
Changing the number of logs on the system will not impact the log files already
stored on the system unless the new value is lower than the number of log files currently in
storage. If so, the system will delete as many log files as needed to drop the number of logs
to the new value starting with the oldest file and working forward.
Command Example:
ATS-6501> log_number 15
Query:
ATS-6501>settings gps_logging:ftp:file_count
15
Longitude:
Description:
Sets the ATS-6501 longitude. The ATS-6501 will respond with “OK” when
the settings have been accepted. The command will only accept the values in decimal
format and longitudes in the western hemisphere must be preceded with a (-) sign or
followed with a [W]. Default is the eastern hemisphere.
Syntax
: longitude [nf]
Note:
Once this command is executed, the positioning mode will be manual and the
latitude and altitude values in the manual gps settings will be in effect.
Command Examples:
ATS-6501>longitude 77.44086542274004
ATS-6501>longitude 77.44086542274004E
ATS-6501>longitude -77.44086542274004
ATS-6501>longitude 77.44086542274004W
