DTMF Programming
3-12
Installation and Programming Manual
Note: Do not forget to enter programming mode by dialling *900 and the
administrator’s password before using the programming commands.
Table 3-4 Commands to Create Mailboxes
OPERATION
COMMAND
Creating a range of mailboxes
*500 + First M Last M #
Creating one mailbox
*501 + Mailbox #
Selecting an announcer mailbox
*502 + XXXX + Y + #
where:
XXXX = existing mailbox number
Y = 0; Regular mailbox (default)
Y = 1; Announcer mailbox
Deleting a mailbox
*510 + Mailbox #
Make sure to remove any transfer to the mailbox
from the Automated Attendant scripts before
deleting the mailbox.
Table 3-4 Commands to Create Mailboxes (continued)
OPERATION
COMMAND
Creating a range of virtual mailboxes
*520 + First M Last M #
Creating one virtual mailbox
*521 + Mailbox #
Defining whether to play or skip the
time and date stamp during message
playback for a range of mailboxes
*530 + First M Last M B + #
where
B = 0; Play the date and time stamp (default)
B = 1; Skip the date and time stamp
Defining whether to play or skip the
time and date stamp during message
playback for one mailbox
*531 + Mailbox B + #
where
B = 0; Play the date and time stamp (default)
B = 1; Skip the date and time stamp
Defining a language for a range of
mailboxes
*532 + First M Last M Z + #
where
Z = 1, 2 or 3 (language number)
Defining a language for a mailbox
*533 + Mailbox Z + #
where
Z = 1, 2 or 3 (language number)
