Agilent X-Series Signal Generators SCPI Command Reference
135
System Commands
Memory Subsystem (:MEMory)
:DELete:UFLT
Supported
All Models
:MEMory:DELete:UFLT
This command deletes all user–flatness correction files.
Key Entry
Delete All UFLT Files
:DELete[:NAME]
Supported
All Models
:MEMory:DELete[:NAME] "<file name>"
This command clears the user file system of "<file name>".
Key Entry
Delete File
Remarks
Refer to
File Name Variables
for information on the file name syntax.
When deleting a waveform (WFM1) file from memory, the marker file and file
header, associated with the waveform file, will also be deleted.
:EXPort[:ASCii]:PTRain
Supported
All with Option 320 and either UNU or UNW
:MEMory:EXPort[:ASCii]:PTRAin <"filename">
This command writes out a CSV/ASCII file to the BINARY directory. User may supply their own
extender as part of the filename. Refer to
:EXPort[:ASCii]:SEParator:COLumn
and
:EXPort[:ASCii]:SEParator:DECimal
.
Example
:MEM:EXP:PTR "myfile.csv"
The preceding example saves a power train file to “myfile.csv”.
Key Entry
Export To File
:EXPort[:ASCii]:SEParator:COLumn
Supported
All with Option 320 and either UNU or UNW
:MEMory:EXPort[:ASCii]:SEParator:COLumn TAB|SEMicolon|COMMa|SPACe
:MEMory:EXPort[:ASCii]:SEParator:COLumn?
This command selects whether the column separator is a tab, ";", "," or a " " during export of
CSV/ASCII files.
This value is persistent across preset/recall and power cycles. (At the factory the MXG is set to
COMMa
(“,”).) Refer to
:EXPort[:ASCii]:SEParator:DECimal
.
Key Entry
Export Column Separator
