Guppy PRO Technical Manual
V4.1.2
231
The possible increment of the work area position and size is defined by the
YUNITS and XUNITS fields. The camera automatically adjusts your settings to
permitted values.
Color correction
To switch off color correction in YUV mode: see bit [6]
0xF1000394 AF_AREA_POSITION
Left
[0 to 15]
Work area position
(left coordinate)
Top
[16 to 31]
Work area position
(top coordinate)
0xF1000398 AF_AREA_SIZE
Width
[0 to 15]
Width of work area size
Height
[16 to 31]
Height of work area size
Note
If the adjustment fails and the work area size and/or work area
position becomes invalid, then this feature is automatically
switched off.
Read back the ON_OFF flag, if this feature does not work as
expected.
Register
Name
Field
Bit
Description
0xF10003A0 COLOR_CORR
Presence_Inq
[0]
Indicates presence of this
feature (read only)
---
[1 to 5]
Reserved
ON_OFF
[6]
Color correction on/off
default: on
Write: 02000000h to switch
color correction OFF
Write: 00000000h to switch
color correction ON
Reset
[7]
Reset to defaults
---
[8 to 31] Reserved
Table 137: Advanced register: Color correction
Register
Name
Field
Bit
Description
Table 136: Advanced register: Autofunction AOI (continued)
