HBZMXSIB/10/16SD-PR-1
Page 75
buffer[4] = 1 - Negative Edge,0 - Positive Edge
ah) Setting the Network Address
buffer[0] = 0xff;
buffer[1] = 0xAA;
buffer[2] = 1;
buffer[3] = NETWORK_ADDRESS;
buffer[4] = Binary number (0-255)
UPLOADING DATA
a) Alarm history list
When the "Request Alarm History List" message is
received by the system, it will respond by sending an
ASCII string for every alarm event in its alarm history
list. The string is formatted as follows:
dd.bmm/ddbhh:mm:ss<CR><LF>
dd - alarm event number (0 - 99)
b - space character
mm - month
dd - day
hh - hours
mm - minutes
ss - seconds
<CR><LF> - Carriage return /line-feed pair
b) Activity settings
Six bytes are uploaded:
i) Sensitivity, (1 - 10)
ii) Relay, (0 - none, 1 - relay 1, 2 - relay 2, 3 - both)
iii) Link to Alarm, (1 - 16)
iv) False Alarm Rejection, (0 - low, 1 - medium, 2 - high)
v) Size Discrimination, (1 - 255)
vi) Record Rate, (0 - none, 1 - 2x, 2 - 4x, 3 -
interleaved)
c) Activity grids
16 x 32 bytes are uploaded. 1st 32 bytes are zones
from camera 1, 2nd 32 bytes from camera 2, etc.
(Two bytes per row, 16 rows)
d) Alarm and videoloss
4 bytes are uploaded. The 1st 2 represent the alarms in
the system (MSB,LSB).
The next 2 bytes represent the videoloss status (MSB,
LSB).
Summary of Contents for ZMX/BD/10
