Chapter 21: RMON Configuration Guide
286
DIGITAL GIGAswitch/Router User Reference Manual
The following table shows the
rmon
command that you use to configure each RMON
group:
To configure the Address
Map group.
rmon address-map index
<index-number>
port
<port>
[
owner
<string>
] [
status enable|disable
]
To configure the Application
Layer Matrix top n entries.
rmon al-matrix-top-n index
<index-number>
matrix-
index
<number>
ratebase terminal-packets|terminal-
octets|all-packets|all-octets duration
<number>
size
<number>
[
owner
<string>
] [
status enable|disable
]
To configure the Alarm
group.
rmon alarm index
<index-number>
variable
<string>
[
interval
<seconds>
] [
falling-event-index
<num>
]
[
falling-threshold
<num>
] [
owner
<string>
] [
rising-
event-index
<num>
] [
rising-threshold
<num>
]
[
startup
rising|falling|both
] [
status enable|disable
]
[
type
absolute-value|delta-value
]
To configure the Packet
Capture group.
rmon capture index
<index-number>
channel-
index
<number>
[
full-action
lock|wrap
] [
slice-size
<number>
] [
download-slice-size
<number>
]
[
download-offset
<number>
] [
max-octets
<number>
]
[
owner
<string>
] [
status enable|disable
]
To configure the Filter group,
you must configure both the
Channel and Filter control
tables.
rmon channel index
<index-number>
port
<port>
[
accept-type
matched|failed
] [
data-control
on|off
]
[
turn-on-event-index
<number>
] [
turn-off-event-
index
<number>
] [
event-index
<number>
] [
channel-
status
ready|always-ready
][
description
<string>
]
[
owner
<string>
] [
status enable|disable
]
rmon filter index
<index-number>
channel-index
<number>
[
data-offset
<number>
] [
data
<string>
]
[
data-mask
<string>
] [
data-not-mask
<string>
] [
pkt-
status
<number>
] [
status-mask
<number>
] [
status-not-
mask
<number>
] [
owner
<string>
] [
status
enable|disable
]
To configure the Etherstats
group.
rmon etherstats index
<index-number>
port
<port>
[
owner
<string>
] [
status enable|disable
]
To configure the Event group.
rmon event index
<index-number>
type
none|log|trap|both
[
community
<string>
]
[
description
<string>
] [
owner
<string>
] [
status
enable|disable
]
To configure the History
group.
rmon history index
<index-number>
port
<port>
[
interval
<seconds>
] [
owner
<string>
] [
samples
<num>
] [
status enable|disable
]
