5 Implementation of EtherNet/IP
5.3 VSC-Vendor Specific Classes
XI/ON: XNE-GWBR-2ETH-IP
09/2011 MN05002007Z-EN
www.eaton.com
111
A
Depend on the
selected opera-
ting mode (CNT/
MSRM) and are
not supported in
the other opera-
ting mode. Please
refer to Attribute
No. 113 BASIC
MODE.
128
(80h)
CNT
function DO2
A
G/S
ENUM
USINT
Defines the function of the output DO2.
This is not a physical output, meaning, the
value from this output is read in the process
input image only.
Function DO2:
– 0: output
– 1: CNT: on when count value
≧
reference
value
– 2: CNT:
on when count value
≦
reference value
– 3: CNT:
pulse when count value = reference value
– 4 to 255: reserved
129
(81h)
Signal evaluation
A
G/S
ENUM
USINT
Defines the kind of signal evaluation.
Signal evaluation:
– 0: pulse and direction
– 1: rotary sensor: single
– 2: CNT: rotary sensor: double
– 3: CNT: rotary sensor: fourfold
– 4 to 255: reserved
130
(82h)
Sensor/input filter
(A)
G/S
ENUM
USINT
Defines the value of the input filter A.
Sensor/input filter (A):
– 0: 2.5
μ
s / 200 kHz
– 1: 25
μ
s / 20k Hz
– 2 to 255: reserved
131
(83h)
Sensor/input filter
(B)
G/S
ENUM
USINT
Defines the value of the input filter B.
Sensor/input filter (B):
– 0: 2.5
μ
s / 200 kHz
– 1: 25
μ
s / 20 kHz
– 2 to 255: reserved
132
(84h)
Sensor/input filter
(DI)
G/S
ENUM
USINT
Defines the value of the input filter DI.
Sensor/input filter (DI):
0: 2.5
μ
s / 200 kHz
1: 25
μ
s / 20 kHz
2 to 255: reserved
133
(85h)
Sensor (A)
G/S
ENUM
USINT
Defines the sensor mode.
ENUM USINT sensor (A):
– 0: normal
– 1: inverted
– 2 to 255: reserved
Table 55:
Object instance
Attr.
no.
dec.
(hex.)
Attribute name
G
et/
S
et
Type
Description
