EG_GenLoc41e_1055_UG_003_UK
Page 30 / 71
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCOGENER reserves the right to make any modifications.
Dct_427_02
The response is in the following format and the table below shows examples of responses:
+GPSPOS:<fix>,<time>,<date>,<latitude>,<longitude>,<altitude>,<hdop>,<speed>,<cap>,<nbsat>
<fix>
0 invalide fix
1 2D fix
2 3D fix
-1 impossible to define a position
<time>
: hhmmss.zz
example : 083205.00 -> 8 hours 32 minutes 05 seconds and 00 hundredth of a second in UTC
<date>
: ddmmyy
example : 180406 -> the 18 April 2006
<latitude>
: ddmm.mmmmm(N/S)
dd (degree) 00 to 90
mm.mmmmm (minute) 00,00000 to 59,99999
N/S North or South
example : 4716.81310N -> latitude 47 degrees 16,81310 minutes North
<longitude>
: dddmm.mmmmm(E/W)
ddd (degree) 00 to 180
mm.mmmmm (minute) 00,00000 to 59,99999
E/W East or West
example : 00003.51202W -> longitude 0 degree 0 3,51202 minutes West
<altitude>
: mmmm.m in meters
<hdop>
: mmm.mm horizontal dilution position in meters
<speed>
: ssss.s ground speed in km/h
<cap>
: dddmm.mmmm
ddd (degree) 000 to 360
mm.mmmm (minute) 00,0000 to 59,9999
<nbre sat>
: nn number of satellites seen
The following table shows examples of responses returned by this command.
Command
Response
Interpretation
AT+GPSPOS
+GPSPOS:-1,,,,,,,,,0
It is not possible to define a position.
Check the positioning of the GPS antenna
or the GPS configuration (see paragraph
8.2.8.3 external antenna).
+GPSPOS:0,083138,180406,,,,,,,6
It is not yet possible to have a position but
the date and time information are
available.
A complete frame should be obtained
soon or the antenna position is not
optimum (see paragraph 8.2.6.3)
+GPSPOS:2,083205,180406,4716.81310N,0
0003.51202W,44.9,2.14,0.037,33.43,10
A position is read and all the information is
available.
The frame is considered as complete.
The GPS LED is flashing.