Rev. B
6-57
HMXMC001013
31-Mar-06
6.16 ERROR LOG, CONTINUED
Macro Error Definition Table (cont.)
36 Keyboard priority range error
37 Invalid keyboard identity for macro numeric input command
38 Invalid destination for keyboard macro numeric input command
39 Too many digits requested for keyboard macro numeric input
40 Invalid scan clear command
41 No dynamic macro timer available
42 User flag range error (0 8 only)
43 Keyboard operator range error (0 100 only)
44 User defined character range error, in direct comm port writes
45 Undefined comm port number, in direct comm. Port writes
46 Internal change network source
47 Internal change network source node command format error
48 Scan sequence entry number is out-of-range i.e.: greater than (99)
49 Error in command format received from a subrack/keyboard
50 Parity error in received data from a subrack/keyboard
51 Range error in Blank Channel command (valid 0 - 3 only)
52 Unknown Special WORD command. E.g.: <WARM-BOOT> etc.
53 Other errors detected during Cold/Warm Boot. Check ERRORLOG.
As well as the macro error number, details of the macro trail are also given in the Error
Log. The macro trail details the actual event that caused the macro to begin execution,
which is given as a 2-letter code and lists the system macro lines called prior to the
macro error occurring.
The event codes are listed in the table below:
Event Code
Description of Event
AS
External alarm start macro
AF
External alarm finish macro
VS
Video input start macro
VF
Video input finish macro
CB
System cold boot macro
WB
System warm boot macro
KI
Keyboard key intercept macro (key-pressed)
KR
Keyboard key intercept macro (key-released)
PE
Keyboard post event macro (executed)
NT
Network macro received from another MAXPRO-Net network node
LN
Local network macro (internal action request type)
LB
Local network macro (status broadcast type)
PE
Post-event macro (for a keyboard)
SN
Operator sign-on macro
SF
Operator sign-off macro