93
ICC
o
Create objects for floor 2’s command data
For the first object, enter the following:
•
Select
Analog Value
from the
Type
selection group.
•
Enter “F2 Cmd Data 1” into the
Object Name
field.
•
Enter “2003” into the
Instance
field.
•
Enter “112” into the
Database Addr
field.
•
Select
32-bit Unsigned
from the
Data Type
dropdown
menu.
•
Enter “1” into the
Multiplier
field.
•
Select
No Units (95)
from the
Units
dropdown menu.
•
Click
Create
.
Repeat these steps for the other two objects, increasing the
Object
Name
by 1,
Instance
by 1, and
Database
Addr
by 4 each time.
o
Create objects for floor 3’s monitor data
For the first object, enter the following:
•
Select
Analog Value
from the
Type
selection group.
•
Enter “F3 Mon Data 1” into the
Object Name
field.
•
Enter “3000” into the
Instance
field.
•
Enter “24” into the
Database Addr
field.
•
Select
32-bit Unsigned
from the
Data Type
dropdown
menu.
•
Enter “1” into the
Multiplier
field.
•
Select
No Units (95)
from the
Units
dropdown menu.
•
Click
Create
.
Repeat these steps for the other two objects, increasing the
Object
Name
by 1,
Instance
by 1, and
Database
Addr
by 4 each time.
o
Create objects for floor 3’s command data:
For the first object, enter the following:
•
Select
Analog Value
from the
Type
selection group.
•
Enter “F3 Cmd Data 1” into the
Object Name
field.
•
Enter “3003” into the
Instance
field.
•
Enter “124” into the
Database Addr
field.
•
Select
32-bit Unsigned
from the
Data Type
dropdown
menu.
•
Enter “1” into the
Multiplier
field.
•
Select
No Units (95)
from the
Units
dropdown menu.
•
Click
Create
.
Repeat these steps for the other two objects, increasing the
Object
Name
by 1,
Instance
by 1, and
Database
Addr
by 4 each time.
Finishing Up
•
Download the configuration to the gateway (see section 8.1 for more
information on downloading a configuration to a device).
•
Connect to the gateway with your PLC.
