M-7026
M-7026 User Manual Rev: 1.5 Date: 2016/03/10
128
2.62 @AADODD
Description:
This command is used to set the Digital Output channels of a specified module
to active or inactive.
Syntax:
@AADODD[CHKSUM](CR)
@
Delimiter character
AA
The address of the module to be set in hexadecimal format (00 to FF)
DO
The command to set the Digital Output channels
DD
A two-digit hexadecimal value representing the status of the Digital
Output channels, where bit 0 corresponds to Digital Output channel 0,
bit 1 corresponds to channel 1, etc. When the bit is 0, it denotes that
the Digital Output channel will be set to inactive, and 1 denotes that
the channel will be set to active.
Response:
Valid Command:
!AA[CHKSUM](CR)
Invalid Command:
?AA[CHKSUM](CR)
!
Delimiter character to indicate a valid command
?
Delimiter character to indicate an invalid command
AA
The address of the responding module in hexadecimal format (00 to
FF)
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Notes:
1.
If the Digital Output channel is already set as an alarm output, then the
value written to the channel will be ignored.
2.
If a Host Watchdog timeout occurs, the module will return a response
indicating that the command was invalid and the Digital Output value that
was sent will be ignored.
Examples:
Command: @01DO01
Response: !01
Sets Digital Output channel 0 of module 01 to active, and sets the other
Digital Output channels to inactive and returns a response indicating that
the command was successful.
Command: @01DI
Response: !0100102
Reads the status of the Digital Input and Digital Output for all channels of
module 01 and returns a response indicating that the command was
successful, and showing that Digital Output is active on channel 0 and
Digital Input is active on channel 1.
Summary of Contents for M-7026
