Chapter 2: Configuring the PDU
13
In order to
Use this command
Make the connection
successful by ignoring the
"incorrect" system time
network wireless allowConnectionWithIncorrectClock <option3>
<option3> =
true
or
false
•
Wireless IPv4 / IPv6 settings:
Commands for wireless IP settings are identical to those for wired networking. Just replace the variable <ETH> with the
word 'wireless'. The following illustrates a few examples.
To set or enable
Use this command
IPv4 configuration method
network ipv4 interface WIRELESS configMethod <mode>
<mode> =
dhcp
(default) or
static
IPv6 configuration method
network ipv6 interface WIRELESS configMethod <mode>
<mode> =
automatic
(default) or
static
To verify network settings:
After exiting the above configuration mode and the # prompt re-appears, type this command to verify all network settings.
show network
The IP address configured may take seconds to take effect.