Chapter 4: Using the Command Line Interface
156
Variables:
•
<ETH> is one of the network interfaces:
ethernet (or ETH1/ETH2)
,
wireless
or
all
.
Option
Description
eth1
Show the IPv4 or IPv6 configuration of the ETH1 interface.
eth2
Show the IPv4 or IPv6 configuration of the ETH2 interface.
all
Show the IPv4 or IPv6 configuration of all interfaces.
You can type the CLI command without the word 'all.' For example,
show network ipv4
interface
.
Network Interface Settings
This command shows the specified network interface's information which is NOT related to IP configuration. For example,
the Ethernet port's LAN interface speed and duplex mode, or the wireless interface's SSID parameter and authentication
protocol.
#
show network interface <ETH>
Variables:
•
<ETH> is one of the network interfaces:
ethernet (or ETH1/ETH2)
,
wireless
or
all
.
Option
Description
eth1
Show the IPv4 or IPv6 configuration of the ETH1 interface.
eth2
Show the IPv4 or IPv6 configuration of the ETH2 interface.
all
Show the non-IP settings of all interfaces.
You can type the CLI command without the word 'all.' For example,
show network interface
.
Network Service Settings
This command shows the network service settings only, including the Telnet setting, TCP ports for HTTP, HTTPS, SSH
and Modbus/TCP services, and SNMP settings.
#
show network services <option>