Chapter 2: Configuring the PDU
11
To set or enable
Use this command
IPv6 configuration method
network ipv6 interface <ETH> configMethod <mode>
<mode> =
automatic
(default) or
static
Preferred host name (optional)
network <ipvX> interface <ETH> preferredHostName <name>
<name> = preferred host name
IP address returned by the DNS
server
network dns resolverPreference <resolver>
<resolver> =
preferV4
or
preferV6
•
Static IP configuration:
To set
Use this command
Static IPv4 or IPv6 address
network <ipvX> interface <ETH> address <ip address>
<ip address> = static IP address, with a syntax similar to the example below.
Example:
192.168.7.9/24
Static IPv4 or IPv6 gateway
network <ipvX> gateway <ip address>
<ip address> = gateway's IP address
IPv4 or IPv6 primary DNS server
network dns firstServer <ip address>
<ip address> = DNS server's IP address
IPv4 or IPv6 secondary DNS
server
network dns secondServer <ip address>
<ip address> = DNS server's IP address
IPv4 or IPv6 third DNS server
network dns thirdServer <ip address>
<ip address> = DNS server's IP address
Commands for wireless networking:
•
General wireless settings:
To set or enable
Use this command
Wireless interface
network wireless enabled <option>
<option> =
true
, or
false
SSID
network wireless SSID <ssid>
<ssid> = SSID string
