LambdaDriver 400 & 800
ML46430, Rev. 07
October 2004
The default gateway address is : 197.090.222.58
Notes
–
Command
set-gatew
Description Set/change default gateway.
Syntax
set-gatew opt.[arg #0]
where,
opt.[arg #0] = <IP address of default gateway>.
Default
opt.[arg #0] = 0.0.0.0
Example
SYS_console>set-gatew 197.090.222.58
Notes
Caution!
Changing the default gateway using the command
set-gatew
at
a TELNET station will disrupt connection to the LDx00!
To reestablish connection, the appropriate Default Gateway
address will have to be assigned to the LDx00 using, for e.g., the
interconnection shown in
F
.
igure 78
Command
get-arp-tbl
Description Show ARP table entries together with their indexes (IDs).
Syntax
get-arp-tbl opt.[arg #0] opt.[arg #1]
where,
opt.[arg #0] = <Index of entry to be displayed first
while excluding entries of lower index>.
opt.[arg #1] = <Number of entries to be displayed>.
Default
opt.[arg #0] = First entry of ARP table.
opt.[arg #1] = Till end of ARP table.
Example
SYS_console>get-arp-tbl 0 2
ARPTBL number of entries = 3
#### If Ip MAC TTL
==================================================
0 01 194.090.136.254 00-00-b0-2f-04-00 1200
1 01 194.090.136.244 00-01-03-8a-00-84 1200
Notes
Command available only in Operational CLI.
Command
del-arp-entry
Description Delete ARP table entries.
Syntax
del-arp-entry [arg #0]
where,
[arg #0] = <IP address in entry|*>
(* = all entries)
Default
–
Example
SYS_console>del-arp-entry 197.090.222.58
Notes
Command available only in Operational CLI.
Command
add-arp-entry
153
