Commands listed in alphabetical order
MATH:MATH2:LABEL:YPOS?
might return
:MATH:MATH2:LABEL:YPOS 0
,
indicating that the waveform label for the Math 2 waveform is currently located at
the baseline of the waveform.
MATH:MATH<x>:SOUrce<x>
This command sets or queries the speci
fi
ed math source. The source in the
command can be either 1 or 2. This command sets the Basic Math components in
the user interface, with two sources and a function. You would also need to set the
math type to Basic to see the change in the user interface but this will not effect
the programmable interface. The math waveform and source are speci
fi
ed by x.
Group
Math
Syntax
MATH:MATH<x>:SOUrce<x> {CH<x>|MATH<x>|REF<x>}
Related Commands
Arguments
Arguments are possible math sources.
SOURCE1
and
SOURCE2
are for use when
the
MATH:MATH<x>:TYPE
is
BASIC
.
Examples
MATH:MATH2:SOURCE1 CH1
sets the
fi
rst source of math 2 to Channel 1.
MATH:MATH3:SOURCE2?
might return
:MATH:MATH3:SOURCE2 REF3
indicating the second source of Math 3 is Ref 3.
MATH:MATH<x>:SPECTral:HORZ
This command sets or queries the horizontal display scale of the spectral math
waveform. The math waveform is speci
fi
ed by x.
Group
Math
Syntax
MATH:MATH<x>:SPECTral:HORZ {LOG|LINEAr}
Arguments
LINEAr
sets the SpectralMag units to linear.
LOG
sets the SpectralMag units to log.
2-372
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
