Command groups
Table 2-40: Trigger commands (cont.)
Command
Description
TRIGger:{A|B}:BUS:B<x>:LIN:DATa:
QUALi
Speci
fi
es the LIN data quali
fi
er. This only applies if the trigger condition is
IDANDDATA or DATA.
TRIGger:{A|B}:BUS:B<x>:LIN:DATa:SIZe
Speci
fi
es the length of the data string in bytes to be used for LIN trigger.
TRIGger:{A|B}:BUS:B<x>:LIN:DATa:VALue
Speci
fi
es the binary data string to be used for LIN trigger condition if trigger condition
is ID or IDANDDATA.
TRIGger:{A|B}:BUS:B<x>:LIN:ERRTYPE
Speci
fi
es the error type be used for LIN trigger.
TRIGger:{A|B}:BUS:B<x>:LIN:IDenti
Speci
fi
es the binary address string used for LIN trigger if the trigger condition is
ID or IDANDDATA.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:
CONDition
Sets or queries the
fi
eld or condition for a MIL-STD-1553 bus to trigger on.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:
ERRTYPe
Sets or queries the type of error condition for a MIL-STD-1553 bus to trigger on.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:
COMMAND:TRBit
Sets or queries the value of the command word Transmit / Receive bit for a
MIL-STD-1553 bus to trigger on.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:
COMMAND:PARity
Sets or queries the value of the command word parity bit for a MIL-STD-1553 bus to
triggering on.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:
COMMAND:COUNt
Sets or queries the value of the command word "word count"
fi
eld for a
MIL-STD-1553 bus to triggering on.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:
COMMAND:SUBADdress
Sets or queries the value of the command word "subaddress"
fi
eld for a
MIL-STD-1553 bus to triggering on.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:
COMMAND:ADDRess:QUALi
Sets or queries the quali
fi
er to be used when triggering on command word addresses
for a MIL-STD-1553 bus.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:
COMMAND:ADDRess:VALue
Sets or queries the low value when triggering on command word addresses for
a MIL-STD-1553 bus.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:
COMMAND:ADDRess:HIVALue
Sets or queries the high value when triggering on command word addresses for
a MIL-STD-1553 bus.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:DATa:
PARity
Sets or queries the value of the command word parity bit for a MIL-STD-1553 bus to
triggering on.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:DATa:
VALue
Sets or queries the value when triggering on data words for a MIL-STD-1553 bus.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:
STATus:PARity
Sets or queries the value of the status word parity bit for a MIL-STD-1553 bus to
triggering on.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:
STATus:ADDRess:QUALi
Sets or queries the quali
fi
er to be used when triggering on status word addresses for
a MIL-STD-1553 bus.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:
STATus:ADDRess:QUALi
Sets or queries the quali
fi
er to be used when triggering on status word addresses for
a MIL-STD-1553 bus.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:
STATus:ADDRess:VALue
Sets or queries the low value when triggering on status word addresses for a
MIL-STD-1553 bus.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:
STATus:ADDRess:HIVALue
Sets or queries the high value when triggering on status word addresses for a
MIL-STD-1553 bus.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:
STATus:BIT:ME
Sets or queries the value of the message error bit (ME bit, bit 9) in a status word for
a MIL-STD-1553 bus to triggering on.
2-80
MSO54, MSO56, MSO58, MSO58LP Programmer
Summary of Contents for MSO54
