Command groups
Math command group
Use the commands in the Math Command Group to create and de
fi
ne math
waveforms. Use the available math functions to de
fi
ne your math waveform.
The math waveform you create depends on sources listed in the math expression.
If you change these sources, the math waveforms you previously de
fi
ned will be
affected.
Math expressions can be simple, containing no mathematical computation, such
as CH1, which speci
fi
es that a waveform shows the signal source of channel 1.
Math expressions can also be complex, consisting of 100 plus characters and
comprising many sources, functions, and operands.
The acquisition of a live waveform can stop for several reasons: You can turn off
the channel, stop the waveform (via Run/Stop from the Horiz/Acq menu), or stop
the trigger (via Run/Stop from the Trig menu). When you turn off the channel,
math continues and data is acquired but is not displayed. When you stop either the
waveform or the trigger, the math calculation stops, and the last math calculation
performed is displayed.
When a live waveform updates or a reference waveform is altered, math
waveforms containing those waveforms as sources are also updated to re
fl
ect the
changes. Also, sources must exist but do not need to be displayed to be used in
and to update math waveforms.
NOTE.
Math commands are present once a math has been added.
Table 2-30: Math commands
Command
Description
Sets or queries the global state of the speci
fi
ed math.
Sets or queries the overall selected math.
DISplay:WAVEView<x>:MATH:MATH<x>:
STATE
Sets or queries the state of the speci
fi
ed math waveform in the speci
fi
ed waveview.
DISplay:WAVEView<x>:MATH:MATH<x>:
VERTical:POSition
Sets or queries the vertical position in divisions of the speci
fi
ed math waveform.
DISplay:WAVEView<x>:MATH:MATH<x>:
VERTical:SCAle
Sets or queries the vertical scale of the speci
fi
ed math waveform.
Adds the speci
fi
ed math.
Sets the
fi
le path for a
fi
le of
fi
lter coef
fi
cients and reads the
fi
le.
Deletes the speci
fi
ed math.
Lists all currently de
fi
ned math waveforms.
Sets or queries the math average mode
fl
ag.
Sets or queries the number of acquisitions at which the averaging algorithm will
begin exponential averaging.
MSO54, MSO56, MSO58, MSO58LP Programmer
2-37
Summary of Contents for MSO54
