11
LOCATIONS 078-085: PROGRAMMING THE ZONE TYPES
Locations 078 through 085 contain a number identifying the characteristics of each of the 8 zones. Location 078
corresponds to zone 1 and location 085 corresponds to zone 8. Each zone will factory default according to the
programming worksheet. To program zone characteristics other than the default values, program a number from "1" to
"9" based on the zone types available in the chart on the following page.
DATA
AVAILABLE ZONE TYPES
"1"
DAY ZONE
- When armed, a trip produces an instant alarm. When disarmed, a trip activates the keypad
sounder.
"2"
24 HOUR
- A trip on a 24 Hour zone produces an instant alarm when armed or disarmed.
"3"
ENTRY/EXIT
- A trip will start entry delay. The lack of a trip during exit delay will enable the Automatic
Bypass or Instant mode if so programmed.
"4"
INTERIOR DELAY
- A trip on Interior Delay zone will initiate an entry delay. It will be ignored during exit
delay and when disarmed .
"5"
INTERIOR FOLLOWER
- Interior zone that follows the delay zones. It is instant during non-delay times. It
can be bypassed before arming, or by allowing it to automatically be bypassed in the Automatic
Bypass/Instant mode if so programmed.
"6"
INSTANT
- Produces an instant alarm if tripped when armed. Ignored when disarmed.
"7"
24 HOUR SILENT
- A trip on a 24 hour silent zone will communicate to the central station when the
Ranger 8980 is armed or disarmed.
"8"
FIRE
(PRIORITY WHEN AHJ HAS NOT APPROVED) - A short on a FIRE zone (non-bypassable) will
communicate to the central station when the Ranger 8980 is armed or disarmed. An open will create a
Trouble condition. Keypad LED will be steady for FIRE, and flashing for Trouble.
"9"
SECONDARY DELAY
- A secondary delay zone works like an entry/exit delay zone but has its own
independent delay time (see locations 178-179).
NOTE: WHEN PROGRAMMING THE FOLLOWING COMMUNICATOR CODES,
A "10" MUST BE PROGRAMMED IN ORDER TO REPORT A ZERO (0).
LOCATION 086-087: PROGRAMMING THE RANGER 8980 FOR DURESS CODE CAPABILITY
The Ranger 8980 has the ability to report a duress code when the system is armed or disarmed with user code number
7 and a duress communicator code is programmed in locations 086-087. If both locations are "0", the duress capability
is disabled and user code number 7 can only be used as a standard arm/disarm code. Location 086 contains the
standard digit, and location 087 contains the extended digit. When using 4+2 format, the number programmed in
location 086 is sent as the "ones" digit. The "tens" digit is programmed in location 087.
NOTE: ENABLING THE
MAINTENANCE CODE FEATURE IN LOCATION 167 WILL AUTOMATICALLY DISABLE THE DURESS FEATURE.
LOCATION 088-089: PROGRAMMING FOR AUXILIARY 1, [1] & [3] DOUBLE KEYPRESS
The Ranger 8980 has the ability to report an Auxiliary 1 code and activate the Priority siren each time the [1] and [3]
keys are pressed simultaneously on the keypad. The desired reporting code is programmed in locations 088-089. If
both locations are "0", the Auxiliary 1 double keypress is disabled. Location 088 contains the standard digit, and
location 089 contains the extended digit. When using a 4+2 format, the number programmed in location 088 is sent as
the "ones" digit. The "tens" digit is programmed in location 089. If activated, the siren can be silenced by entering any
arm/disarm code.
