Page 18 of 32
Rev 0.95
Command
Description
SYSTem:DATE? <yyyy>-<mm>-<dd>-
<hh>:<mm>:<ss>
Returns the date and time in the format
DT#yyyy-mm-dd-hh:mm:ss
SYSTem:LOCK:OWNer?
This query returns what mode the system is
currently in. 0 = Local, 1 = Remote, 2 = Local
locked, 3 = Remote locked
SYSTem:LOCK:RELease
This event releases the system from the Remote
Locked Mode. If the system is not in the remote
locked mode, this command has no effect. This
command has no query form.
SYSTem:LOCK:REQuest?
The command attempts to set the system in
remote mode. This event is only implemented as
a query.
SYSTem:LOCK:LREQuest?
The command attempts to set the system in
remote locked mode. The system must be in
remote mode to allow this operation. This event
is only implemented as a query.
SYSTem:TIME hh, mm, ss
Sets the system time. All three parameters must
be given. Both 9 and 09 will work for e.g. setting
the hours. Hours are set as on a 24 hour clock.
SYSTem:TIME? <yyyy>-<mm>-<dd>-
<hh>:<mm>:<ss>
Returns the date and time in the format
DT#yyyy-mm-dd-hh:mm:ss
[SOURce:]FREQuency[:LEVel] {<level (Hz)>|
Sets the switching frequency. This command is
not implemented on all versions of the MPS.
[SOURce:]FREQuency[:LEVel]?
Returns the switching frequency. This command
is not implemented on all versions of the MPS.
