www.enlogic.com
50
4. Connect another Ethernet cable from the Rs485-2 port on the first PDU to the Rs485-1 port on the second
PDU, as shown below:
5. In DNA mode, the default account username is ‘landlord’ and password is ‘12345678’. This account is configured for
proper access and control in DNA mode.
6. To enable this account, login to the CLI with admin credentials.
7. Enter the command ‘dev daisy dna init’.
8. The following message will appear to confirm the landlord account is enabled:
E000
9. DNA is now configured and enabled.
Daisy Chain & DNA Commands in CLI
The following is a list of executable commands available in the CLI for Enlogic DNA use only
DNA Commands
Command
Description
Example
dev daisy dna
Changes mode from daisy chain to
DNA
ENLOGIC> dev daisy dna
E001
System Reboot now, Are you sure?(Y/N):
dev daisy qna
Changes mode from DNA to daisy
chain
ENLOGIC> dev daisy qna
E001
System Reboot now, Are you sure?(Y/N):
dev daisy dna init
Enable preconfigured user account
(landlord role) for DNA mode
Note: This command can only be
used when the PDU is in DNA mode.
ENLOGIC> dev daisy dna init
E000
OR
E80E
(error shown if command used when PDU is not in DNA
mode)
OR
E802
(users's record is out of range: error shown when the 16th
user account or role is existing)
dev daisy dna init create
Replaces the 16th configured user
account and role to landlord in DNA
mode
Note: This command can only be
used when the PDU is in DNA mode.
Note: The PDU allows for 16 user
accounts/roles. In DNA mode, if
16 user accounts/roles exist, use
this command to force/create the
landlord role/account and overwrite
the 16th account/role.
ENLOGIC> dev daisy dna init create
E000