APPENDIX A ASSEMBLER (Sub tool chain)
216
EPSON
S5U1C88000C MANUAL II
WORKBENCH/DEV TOOLS/OLD ASSEMBLER
ra88.bat program source list
echo off
rem **************************************************************************
rem * E0C88 Family Auto Relocatable Assemble Execution Utility
rem *
(Ver. X.XX)
rem *
Copyright(C) SEIKO EPSON CORP. 1993–1996
rem **************************************************************************
rem * customized parameter information
rem * rom=* * : rom capacity(32768 max.)
rem * ram=* * : ram capacity(65536 max.)
rem **************************************************************************
rem ********** customized parameter area (default) **********
rem * caution : customized parameters value do not check,therefore
rem *
please be carefully when you set
rem **********
set rom=32768
set ram=65536
rem ********** command searching path **********
rem set drv=c:\
rem **************************************************************************
rem * main program
rem *
if you want to use another option(s), please append
rem *
option flag(s) at command line.
rem **************************************************************************
:start
echo E0C88 Family Auto Relocatable Assemble Execution Utility Ver. X.XX
echo Copyright (C) SEIKO EPSON CORP. 1993–1996
if "%1"=="" goto usage
:error_chk
if not exist %drv%nul goto exit04
if not exist %1.s goto exit05
if not exist %drv%sap88.exe goto exit06
if not exist %drv%asm88.exe goto exit07
rem (sap88)
:sap88
%drv%sap88 -o %1.ms %1.s
if errorlevel 1 goto exit01
rem (asm88)
:asm88
%drv%asm88 -ROM %rom% -RAM %ram% %1.ms
if errorlevel 1 goto exit02
goto end
:usage
echo usage : ra88 needs [input file_name]
goto skip
:exit01
echo Error stop at %drv%sap88.exe
goto skip
:exit02
echo Error stop at %drv%asm88.exe
goto skip
:exit03
echo Cannot find %drv% installed E0C88 dev. tools directory
goto skip
:exit04
echo Cannot find input file
goto skip
:exit05
echo Cannot find %drv%sap88.exe
goto skip
:exit06
echo Cannot find %drv%asm88.exe
goto skip
:end
echo ra88.bat utility has been successfully executed.
:skip
set rom=
set ram=
set drv=
The drv is a path that locates the execution command
of the ra88.bat. It is set to root directory by default.
Customize it if necessary.
User customization field
Note: There are basically no
error checks made on these
parameter settings, therefore,
do not set the parameter with
settings other than those
specified.
←
Start-up command of sap88
←
Start-up command of asm88
←
Setting the capacity of the ROM
←
Setting the capacity of the RAM
